Description
Specifications
| Voltage | 250 Volts |
| Amperage | 10 Amps |
| Male Plug | IEC60320 C14 |
| Female Connector | IEC60320 C13 |
| ~ Length | 0.9 Meter / 3 Feet |
| Gauge | 18 AWG |
| Conductors | 3 Wire |
| Conductor Color Code | Black, White, and Green | North American Color Code (NACC) |
| ~ Outside Diameter | 7.65 -7.95 mm |
| Packaging | Loose and bundled. |
| Jacket | SJT |
| Jacket Material | PVC |
| Jacket Temp. Rating | 105° C |
| Color | Red |
| Testing | Each cord is tested for dielectric voltage-withstand (Hi-Pot), polarization and continuity. |
| Certifications | UL/cUL, Sony Green Partner |
| Weight | 0.3 lbs |
Notes
Manufactured under ISO14001:2004 and ISO9001:2008 certified management systems.
The C14 male inlet is common to most personal computers. Although the receptacle is rated for 15 amps most devices only draw a small amperage thus the 10amps this cord is rated for is most often adequate however, consult your owners manual specifications to verify. SJT jacket is designed for more rugged usage than the SVT jacket.
Jumper cord commonly used between a PDU and Computer in a data rack or cabinet. The Red color helps distinguish cords in high density installations. Consider using Red cords to denote never disconnect applications. In data environments keep length of cords to a minimum to avoid contact with ethernet cables, improve air flow, and to save money by reducing the power lost over longer cords.
This cord was previously branded under the PowerFig label.
